The DIGILAB 1Kx208 provides an easy start on the subject of Programmable Logic. Yet 100.000 gates, Flash, SRAM and a wealth of interfaces enable the implementation of complex systems, e.g. with Altera's 16- or 32-bit embedded processors. The DIGILAB 1Kx208 comes with a design example that features a pre parameterized 16-bit NIOS RISC processor. This core includes ROM, UART, parallel ports, interfaces to RAM and FLASH, as well as a 16-bit interface for custom on-chip functions. With this kit you're enable to build your own SOC (System On Chip) projects.

DIGILAB 1Kx208 Features :

• Comes with Altera's development system MAX+plus^® II Baseline on CD ROM
• Altera ACEX 1K device EP1K100QC208 (100.000 gates, 4992 Logic Elements, 147 user I/O's, 48kBit RAM)
• Supports Altera's Excalibur/NIOS embedded processors and comes with a pre parameterized 16-bit core
• Fast on-board SRAM 256k x 16
• On-board FLASH program memory 512k x 16
• On-board 18-bit stereo AC97 DSP Codec
  (2 ADCs and 4 DACs)
• USB interface
• RS232 interface
• IDE interface
• VGA output
• All pins are accessible from outside
• Programming interface for parallel port of PC
  (no special download hardware required)
• 4-digit 7-segment display
• 4 push buttons and 8 LEDs
• Socket for optional configuration EPROM (Altera EPC1441, EPC1 or EPC2). The EPC2 can be programmed on board through the JTAG interface
• Serial EEPROM, 1k bit
• Quartz oscillator (48 MHz)
• On-chip PLLs supported
• Example program for easy start

The picture shows the PCB of the DIGILAB 1K208