| DIGILAB picoMAX
|
|
The DIGILAB picoMAX is a prototyping board for Altera EPLDs. The
system is placed in the low-end, low-price segment. The
DIGILAB picoMAX supports approximately 70 Altera components.
One size fits all!
An EPM3032ALC44-10 is included which
provides 32 Macrocells or 600 usable gates and up to 34 user
I/Os. DIGILAB picoMAX can be used with all available
MAX® 7000S, MAX 7000A, MAX 7000B and MAX
3000A EPLDs in 44 Pin or 84 Pin PLCC Packages. As a result,
DIGILAB picoMAX supports up to 160 Macrocells / 3200 usable
gates / 64 user I/Os when using the largest supported
component, the EPM7160SLC84-XX. The kit also includes power
supply, parallel cable for in-system programming (ISP) and
Altera’s design software MAX+plus® II Baseline on
CD ROM. That’s absolutely all you need.
|
|
DIGILAB
picoMAX Features :
- picoMAX printed circuit board with two PLCC sockets, in 44 and 84 Pins
- External access to each pin of both sockets/packages
- EPM3032ALC44-10 (32 Macrocells, 600 gates, 34 user I/O); we reserve the right to ship a larger EPLD with the board
- Voltage regulator incl. complete voltage management, 5V / 3.3V / 2.5V selectable
- Programming interface for directly connecting the DIGILAB picoMAX to the parallel port of your PC
- Power supply
- Board dimensions: approximately 7cm x 9cm
- Patchfield for your own circuitry
- ALTERA's design software MAX+PLUS® II BASELINE on CD ROM
|
This kit plus CD-ROM
and documentation:
|
Top of Page |
|
